elks-enhanced - XT-Emporium

File editor

'\" t
.TH mmount 1 "10Dec18" mtools-4.0.23
.SH Name
mmount - mount an MSDOS disk
'\" t
.de TQ
.br
.ns
.TP \\$1
..

.tr \(is'
.tr \(if`
.tr \(pd"

.SH Note\ of\ warning
This manpage has been automatically generated from mtools's texinfo
documentation, and may not be entirely accurate or complete.  See the
end of this man page for details.
.PP
.SH Description
.PP
The \fR\&\f(CWmmount\fR command is used to mount an MS-DOS disk. It is only
available on Linux, as it is only useful if the OS kernel allows to
configure the disk geometry. Its syntax is:
.PP
\&\fR\&\f(CWmmount\fR \fImsdosdrive\fR [\fImountargs\fR]
.PP
\&\fR\&\f(CWMmount\fR
reads the boot sector of an MS-DOS disk, configures the drive geometry,
and finally mounts it passing
\&\fR\&\f(CWmountargs\fR to \fR\&\f(CWmount. \fR
If no mount arguments are specified, the name of the device is
used. If the disk is write protected, it is automatically mounted read
only.
.PP
.SH See\ Also
Mtools' texinfo doc
.SH Viewing\ the\ texi\ doc
This manpage has been automatically generated from mtools's texinfo
documentation. However, this process is only approximative, and some
items, such as crossreferences, footnotes and indices are lost in this
translation process.  Indeed, these items have no appropriate
representation in the manpage format.  Moreover, not all information has
been translated into the manpage version.  Thus I strongly advise you to
use the original texinfo doc.  See the end of this manpage for
instructions how to view the texinfo doc.
.TP
* \ \ 
To generate a printable copy from the texinfo doc, run the following
commands:
 
.nf
.ft 3
.in +0.3i
    ./configure; make dvi; dvips mtools.dvi
.fi
.in -0.3i
.ft R
.PP
 
\&\fR
.TP
* \ \ 
To generate a html copy,  run:
 
.nf
.ft 3
.in +0.3i
    ./configure; make html
.fi
.in -0.3i
.ft R
.PP
 
\&\fRA premade html can be found at
\&\fR\&\f(CW\(ifhttp://www.gnu.org/software/mtools/manual/mtools.html\(is\fR
.TP
* \ \ 
To generate an info copy (browsable using emacs' info mode), run:
 
.nf
.ft 3
.in +0.3i
    ./configure; make info
.fi
.in -0.3i
.ft R
.PP
 
\&\fR
.PP
The texinfo doc looks most pretty when printed or as html.  Indeed, in
the info version certain examples are difficult to read due to the
quoting conventions used in info.
.PP
Commit message
This repository is read-only for this account.
Repository snapshot

Current branch
master
Visibility
public
Your access
Read
Remote
Configured
File activity

View file history