elks-enhanced - XT-Emporium

File editor

NOTES ON 8086 PROCESSOR ARCHITECTURE

An 8088 is just an 8086 with an 8-bit external bus.

The stack pointer points to the last item pushed; a push decrements the
stack pointer before storing. Hence it's OK for SP to point to the byte
AFTER the top of the stack.

After an interrupt the stack looks like this:

      +---+---+---+---+---+---+
      |   IP  |   CS  | Flags |
      +---+---+---+---+---+---+
        ^
       SP

See also 'source.txt' for bcc function calling conventions.

The register model of the 8086 is rather asymmetrical. There are eight
16-bit registers:

        AX   = AH AL
  (DS:) BX   = BH BL
        CX   = CH CL
        DX   = DH DL
  (SS:) BP
  (DS:) SI
  (ES:) DI
  (SS:) SP

The 8086 has 20 address lines (1MB address space). Addresses are formed by
taking a 16-bit segment register, shifting it left 4 bits, and adding an
offset. The segment registers are CS (code), SS (stack), DS (data) and ES
(extra). The table above shows the default segment used for indexed
instructions; this can be overridden by a segment prefix (e.g. "seg es")

CX has special powers as a loop counter; DX is used for to give addresses in
I/O space. String instructions use DS:SI as source and ES:DI as destination.

Available effective addressing modes for indexed instructions:
	(BX) + (SI) + disp
	(BX) + (DI) + disp
	(BP) + (SI) + disp
	(BP) + (DI) + disp
	(SI) + disp
	(DI) + disp
	(BP) + disp
	(BX) + disp

Flags word:

	15	-
	14	-
	13	-
	12	-
	11	OF	Overflow
	10	DF	Direction (0=autoinc, 1=autodec for string insts)
	 9	IF	Interrupt enable
	 8	TF	Trace (single step)
	 7	SF	Sign
	 6	ZF	Zero
	 5	-
	 4	AF	Carry/borrow from low 4 bits of AL
	 3	-
	 2	PF	Parity
	 1	-
	 0	CF	Carry/borrow

Commit message

This repository is read-only for this account.

Repository snapshot

Current branch
master
Visibility
public
Your access
Read
Remote
Configured

File activity

View file history